Regulatory Library · SBA
13 CFR Part 120: Business Loans
13 CFR part 120 is SBA's regulation for business loans. Feasibility Study Company writes studies for 7(a) and 504 borrowers, and this page quotes the five sections its work rests on, 120.160 on loan conditions, 120.910 on the 504 contribution, and 120.151, 120.210 and 120.931 on limits, with the eCFR date and the amendment history 1.
Section 120.160: loan conditions, and paragraph (b) on appraisals.
Section 120.160 lists the conditions normally required for SBA business loans, and under paragraph (b) SBA may require a feasibility study, along with appraisals or a survey.
Section 120.160 opens with its scope:
"The following requirements are normally required by SBA for all business loans:" 1
Paragraph (b), headed Appraisals, is the only place the part names a feasibility study:
"(b) Appraisals. SBA may require professional appraisals of the applicant's and principals' assets, a survey, or a feasibility study." 1
Three features of the wording stand out. The verb is may. The study sits in one list with appraisals and a survey. And the paragraph says nothing about when SBA asks, what the study covers or who writes it; those details, such as they are, come from the lender rulebook, SOP 50 10 8.1, which lists circumstances for 504 loans. The reading of this section, and whether a study is ever mandatory, belong to the research note The SBA feasibility myth.
The 504 borrower contribution is a percentage of Project cost.
A study's sources and uses are read against this section when the loan is a 504.
Section 120.910(a) sets the borrower's contribution:
"(a) The Borrower must contribute to the Project cash (or property acceptable to SBA obtained with the cash) or land (that is part of the Project Property), in an amount equal to the following percentage of the Project cost, excluding administrative costs:" 2
Four tiers follow, each quoted 2:
- (1) "At least 15 percent, if the Borrower (or Operating Company if the Borrower is an Eligible Passive Company) has operated for two years or less;"
- (2) "At least 15 percent, if the Project involves the acquisition, construction, conversion, or expansion of a limited or single purpose building or structure;"
- (3) "At least 20 percent, if the Project involves conditions described in paragraphs (a)(1) and (2) of this section; or"
- (4) "At least 10 percent, in all other circumstances."
Loan limits and guaranty percentages.
These sections fix how much SBA will support, which sets the size of the project a study is asked to test.
Section 120.151 says the maximum loan amount for any one 7(a) loan and caps the SBA portions to one borrower:
"The maximum loan amount for any one 7(a) loan is $5,000,000." 3
"The aggregate amount of the SBA portions of all loans to a single Borrower, including the Borrower's affiliates as defined in ยง 121.301(f) of this chapter, must not exceed a guaranty amount of $3,750,000, except as otherwise authorized by statute for a specific program." 3
Section 120.210 sets the 7(a) guaranty percentages 4:
"Loans of $150,000 or less may receive a maximum guaranty of 85 percent." "Loans more than $150,000 may receive a maximum guaranty of 75 percent, except as otherwise authorized by law."
Section 120.931 sets the 504 limits 5:
"(a) An outstanding balance of $5,000,000 for each Borrower and its affiliates if the loan proceeds will not be directed towards a Project in paragraph (c) of this section," "(c) $5,500,000 for each Project for:" "(1) Small Manufacturers (NAICS Codes 31-33) with all production facilities located in the United States;"
None of these sections mentions a feasibility study. They matter because they define the project a study is asked to support: a 7(a) request is read against the loan maximum and the guaranty percentage, a 504 request against the contribution tier and the debenture limits, and a borrower with affiliates against the aggregate caps. A study that sizes the project without checking them will come back from the lender whatever its market analysis says.
The affiliate cross-reference in section 120.151 points to 13 CFR part 121, which is where affiliation is defined for size.
Appendix 16 restates the 7(a) limits, and the two should agree.
A lender reads the SOP; the regulation is the source of the numbers it repeats.
Appendix 16 of the SOP, headed 7(a) Maximum Guaranty Amounts and Percentages, repeats figures that sections 120.151 and 120.210 set. It states "The maximum guaranty amount is $3,750,000," "85% for loans of $150,000 or less" and "75% for loans over $150,000" 6. The amount is $3,750,000, and the percentages are 85 percent up to $150,000 and 75 percent above it.
The same Appendix adds a product-specific line that the regulation sections quoted here do not carry: "For SBA Express loans: 50%." The figure is 50% 6. Where a study sizes a project against a guaranty, the regulation fixes the ceiling and the SOP shows how a lender applies it, so a reader checking a figure should open both.
Effective dates, last amendment and what changed.
The part is stable, and the dates below say how stable.
| Item | Date | Source |
|---|---|---|
| eCFR currency date given for Title 13 | November 5, 2026 | 1 |
| Part 120 last amended | June 3, 2025 (civil penalties) | 1 |
| Section 120.160 last changed | May 11, 2023 | 1 |
| Sections 120.151, 120.210, 120.910, 120.931 | No change recorded since December 2016, where the eCFR history starts | 2345 |
Little has changed. The June 3, 2025 amendment concerned civil penalties and did not touch the feasibility provision, and the other sections quoted read as they did when the eCFR's history begins.
Stored text read on November 8, 2026.
13 CFR part 120 questions.
What does paragraph (b) of section 120.160 say?
It is headed Appraisals and reads "SBA may require professional appraisals of the applicant's and principals' assets, a survey, or a feasibility study" 1. Nothing in the wording says when SBA asks, what a study covers or who prepares it.
What is the borrower contribution on a 504 loan under the regulation?
Section 120.910(a) ties it to Project cost, excluding administrative costs. A young borrower or a limited or single purpose building brings it to 15%, both together to 20%, and 10% covers all other circumstances 2.
How much can one borrower owe under a 504 loan?
Section 120.931(a) states $5 million outstanding for each borrower and its affiliates in the general case, and paragraph (c) states $5.5 million per Project for the listed types, which include small manufacturers with all production in the United States 5.
What is the 7(a) loan maximum in the regulation?
Section 120.151 says the maximum loan amount for any one 7(a) loan is $5 million, and caps the SBA portions of all loans to one borrower and its affiliates 3.
How current is this page?
The eCFR stated that Title 13 was current to November 5, 2026, and Part 120 was last amended June 3, 2025. The stored text was read on November 8, 2026 1.
The regulation sets the authority; the lender sets the file.
Feasibility Study Company reads part 120 alongside the lender's own requirements. Describe the loan, and the reply shows where a study would fit in the SBA file.
Request a methodology briefingPrimary texts and dates.
Each quotation is cut from the govinfo copy of Title 13 retrieved November 8, 2026, which the eCFR dated as current to November 5, 2026.
- U.S. Government Publishing Office and Office of the Federal Register (eCFR), 13 CFR 120.160, Loan conditions, eCFR up to date as of November 5, 2026; section last changed May 11, 2023; part 120 last amended June 3, 2025.
- U.S. Government Publishing Office and Office of the Federal Register (eCFR), 13 CFR 120.910, Borrower contributions, eCFR up to date as of November 5, 2026; text unchanged since the eCFR history begins in December 2016.
- U.S. Government Publishing Office and Office of the Federal Register (eCFR), 13 CFR 120.151, What is the statutory limit for total loans to a Borrower? (7(a) maximum and aggregate guaranty), eCFR up to date as of November 5, 2026; text unchanged since December 2016.
- U.S. Government Publishing Office and Office of the Federal Register (eCFR), 13 CFR 120.210, What percentage of a loan may SBA guarantee?, eCFR up to date as of November 5, 2026; text unchanged since December 2016.
- U.S. Government Publishing Office and Office of the Federal Register (eCFR), 13 CFR 120.931, 504 Lending limits, eCFR up to date as of November 5, 2026; text unchanged since December 2016.
- U.S. Small Business Administration, SOP 50 10 8.1, Lender and Development Company Loan Programs, with Technical Policy Updates, Appendix 16: 7(a) Maximum Guaranty Amounts and Percentages, published September 25, 2026, effective October 1, 2026.