SBA 7(a) and 504 · Equity Injection

SBA Equity Injection Requirements

SBA equity injection requirements run from 10% of total project cost for a 7(a) start-up and for a change of ownership 1, to 10% on a standard 504 project, 15% for a new or special purpose project and 20% for both 3. The percentage comes from the SOP and the regulation, not from the study. What Feasibility Study Company's study adds is a test of whether the proposed equity leaves the project able to cover its debt, and what changes if it does not. Ask about a project.

10%
7(a) start-up minimum, of total project cost 1
10%
7(a) initial acquisition minimum, not reducible 1
15%
504 new business or special purpose property 3
20%
504 new business and special purpose property 3
7(a) Equity

One floor for a start-up, and the same floor for an acquisition.

Both 7(a) minimums are the same; what differs is how the base is measured and whether it can be waived.

For a start-up, SOP 50 10 8.1, Section B, has SBA treat an equity injection (applicant contribution) of at least 10% of total project costs as "necessary for a Start-Up Business to operate on a sound financial basis" 1. The chapter defines a start-up for this purpose as a business that "has been in operation (i.e., generating revenue from intended operations) for 1 year or less" 1. Total project costs are "all costs required to become operational, regardless of the source of funds, except for lines of credit and 504 loans" 1.

For a change of ownership, Appendix 15 sets 10% for an initial acquisition and says plainly that "the required equity injection cannot be reduced or eliminated" 1. The remaining categories are also at 10%. A lender may lower or drop the requirement for an expansion or buyout once it has determined the borrower has the liquidity and working capital to keep operating after the deal, and only if the balance sheet "must not have a negative net worth as of the last fiscal year-end" 1. Where the requirement is eliminated, "dedicated permanent working capital" may not be included in that or any other 7(a) term loan request within 90 days 1. Loans to an ESOP buying a controlling interest, defined as at least 51 percent, fall outside the equity requirement 1.

The base also differs. An acquisition is measured on total project cost; an owner buyout on the purchase price in the purchase and sale agreement. Real estate bought with the business carries the same requirement, and where it is financed as a separate loan the lender splits the equity pro rata 1. The change of ownership page covers the rest of the acquisition rules.

504 Equity

The 504 tier rises with a new business and with a special purpose building.

Regulation sets the percentage; the SOP sets the financing split that follows from it.

Under 13 CFR 120.910(a), the borrower must put in cash, property acceptable to SBA bought with cash, or land that forms part of the project property, in an amount tied to project cost excluding administrative costs 3. The percentage is at least 10% in the ordinary case. It becomes 15% when the borrower, or the operating company behind an eligible passive company, "has operated for two years or less," or when the project involves "a limited or single purpose building or structure," and 20% when both conditions are met 3.

SOP 50 10 8.1, Section C, carries the tier into the financing split. Standard terms divide the project as Third Party Lender 50%, debenture 40%, borrower 10%; debenture 35% at a 15% contribution and 30% at 20% 1. A higher tier does more than raise the cash the borrower brings. It also shrinks the debenture, which changes the debt service the project has to cover.

Program and situationMinimum equityBasisSource
7(a) start-up10%Total project costs1
7(a) initial acquisition10%Total project cost, not reducible1
504 standard10%Project cost excluding administrative costs3
504 new business or special purpose15%Project cost excluding administrative costs3
504 new business and special purpose20%Project cost excluding administrative costs3
What Counts

Cash counts without limit; borrowed and seller money counts up to half.

The SOP sorts equity sources into two groups for a 7(a) acquisition.

Appendix 15 names four unlimited sources. The first is cash that is not borrowed, held on the business's balance sheet or received from elsewhere, a gift for example. The second is cash from a guarantor's personal loan, so long as repayment is shown to come from outside the business, and the Appendix adds that "the salary paid to the owner by the business does not qualify." The third is a grant with no clawback or conditional repayment term that could bite during the 7(a) term, and the fourth is a prepaid expense the lender has verified from paid invoices, canceled checks or bank statements 1.

Everything else is a limited source. "Whether individually or in the aggregate," these "may provide no more than half of the required Equity Injection," and the cap is half 1. Standby debt qualifies only on terms of full standby, so nothing is paid on it during the 7(a) term, with SBA Form 155 or an equivalent on file, and "The provider of standby debt may not take an equity investment in the business" 1. Seller debt qualifies if subordinated to the lender and on full standby 1. A non-controlling minority investor must hold under 20% of the business and exert no control, and the investment may not be "subject to any agreement to repay or make distributions to recover the investment prior to release of the SBA guaranty" 1.

The SOP also names what does not count: education, advisory and Agent fees. What does count is the out-of-pocket cost of the business valuation and QoE 1. In an acquisition, seller earnouts prohibited; buyer rebates must pay down the 7(a) loan; purchase-agreement working-capital true-ups are not rebates. Appendix 15 says a working capital true-up is "not a rebate to the Borrower" because the funds remedy a lack of working capital at the time of the acquisition, so the cash may stay with the business 1. Seller debt put in place with a change of ownership may be refinanced only after 36 months in place and current 1.

What the Study Tests

The study asks whether the equity in the structure is enough for coverage.

Meeting the equity tier and clearing the coverage floor are separate tests on the same sources and uses.

The tier is a minimum. The study takes the proposed sources and uses, applies the program's equity rule, then runs the project's cash flow against the debt the remaining structure creates. Three questions follow from the rule as the SOP states it.

  • Is the tier right for the facts? A 504 project with a new business or a special purpose building needs the higher tier, and the study documents which facts apply: how long the operating company has operated and whether the property serves a limited or single purpose.
  • Is the equity the right kind? Standby seller debt and minority money share the half cap, so the study separates cash from capped sources before it counts any of it.
  • Does coverage hold at that equity? More equity means less debt, and less debt means more coverage. The study finds the smallest equity at which the project clears its floor. The coverage page sets out those floors.

For acquisitions the SOP adds a structural cap: total acquisition debt, including seller debt not on full standby, is capped at the business valuation; any excess must be equity. Appendix 15 puts the valuation rule this way: "If the amount paid for the business exceeds the business valuation, the difference must be made up by equity" 1. So a price the valuation cannot carry is an equity problem as well as a price problem. None of these tests is a study requirement; paragraph (b) of 13 CFR 120.160 leaves any study to SBA's discretion 2.

Documenting the Equity

The lender has to trace where the money came from and what it owes.

An injection that cannot be documented does not count, however large it is.

Appendix 15 has the lender "review and document the terms of all equity investments, including provisions that are realized upon the sale of the business" in the credit memorandum 1. Where equity investors help meet the injection, "distributions to the investor that are not made solely for the purpose of satisfying the investor's tax obligations attributable to the business's income are prohibited until the 7(a) loan has been paid off" 1. Extra equity that is not counted toward the injection may take standard distributions, and the lender may write coverage covenants into the investor agreements or the loan agreement 1.

For the borrower this means every dollar needs a paper trail before the application goes in. For the study it means the sources and uses table keeps cash, guarantor-loan cash, grants and each capped source on separate lines, so a reader can see which part of the equity counts without limit and which part shares the half cap.

The same discipline applies on a 504 project. The regulation allows cash, property acceptable to SBA obtained with the cash, or land that is part of the project property 3. Land the borrower already owns is therefore a contribution only when it belongs to the project property, and the study records its value and how that value was established. The appraisal decides the value; the study does not.

Read together, these rules give a working order. Settle the program and tier first, because the percentage follows from the facts. Sort the sources into cash and capped money second, because the half cap limits how much of a structure can be borrowed or deferred. Run coverage third, because that answer shows whether the minimum is enough. Most restructurings happen at the third step, and the sooner a borrower learns that, the cheaper the change.

One caution on timing. The injection is measured against the project as costed at application, so a cost overrun found later reopens the equity question. A study that carries a contingency line in its sources and uses lets the borrower absorb a modest overrun without redoing the structure, and it tells the lender what the contingency is made of.

Worked Cases

Where the site's cases restructured their equity.

In each hypothetical case, the requested equity failed a test and the model restructured it.

In the Seguin, Texas car wash case, a hypothetical sponsor opens at 15.0% equity. That is below the higher tier that applies to a start-up in a single-use building, so the program rule fails the request even though Year 2 coverage would be 1.27x. Restructured at 20.0% equity, coverage reaches 1.34x against the 1.15x floor. The failure was a tier failure and not a coverage failure, and a study that checked only coverage would have missed it.

The Opelika gas station case runs in the opposite order. The minimum injection meets the equity rule, but coverage on the seller's latest year is only 1.18x against 1.25x, and the purchase clears the floor at 14.8% equity. Both cases are worked examples, not client engagements, and in both the equity that works is higher than the equity the rule alone requires.

Equity Injection Questions

SBA equity injection questions.

How much equity does an SBA 7(a) start-up need?

At least 10% of total project costs, which Section B, Chapter 1, defines as "all costs required to become operational, regardless of the source of funds, except for lines of credit and 504 loans" 1. The same chapter treats a business as a start-up during its first year of operating from its intended activities 1.

Can seller financing count as equity?

Only seller debt "subordinated to the Lender and on full standby" may be considered equity, which means nothing is paid on principal or interest during the 7(a) term 1. It shares a cap with other limited sources, which may supply at most half of the required injection 1.

Do the valuation and quality of earnings fees count?

The business valuation and quality of earnings report can count when the buyer pays for them out of pocket: out-of-pocket cost of the business valuation and QoE. Expenses for education, advisory and Agent fees do not 1.

What equity does a 504 project need?

At least 10% of project cost, excluding administrative costs. The floor becomes 15% if the borrower is no more than two years into operation or the structure is built for a limited or single use, and 20% if both are true 3.

Does more equity guarantee approval?

No. Equity is one test and coverage is another. A project can meet the equity tier and still miss its coverage floor, which is why the study runs both on the same structure.

Is a seller earnout allowed in a business purchase?

No. Appendix 15 states "Seller earnouts are prohibited," while buyer rebates based on business performance are allowed 1. Rebate money from the seller must go to principal on the 7(a) loan, and purchase terms that adjust working capital after closing are not rebates: seller earnouts prohibited; buyer rebates must pay down the 7(a) loan; purchase-agreement working-capital true-ups are not rebates.

Equity is a floor. Coverage decides how much more the project needs.

Send Feasibility Study Company the proposed sources and uses. The reply checks the structure against the program tier and the coverage floor together and shows the restructuring if either fails.

Request a methodology briefing
Sources

Data sources and dates.

The equity tiers come from the SOP as stored and from 13 CFR 120.910; confirm the wording against SBA's current posting before relying on it.

  1. U.S. Small Business Administration, SOP 50 10 8.1, Lender and Development Company Loan Programs, with Technical Policy Updates (Section B, Chapter 1; Section C, Chapter 1; Appendix 15), published September 25, 2026, effective October 1, 2026. Section B, Section C and Appendix 15, as stored.
  2. eCFR, 13 CFR 120.160, Loan conditions, up to date as of November 5, 2026.
  3. eCFR, 13 CFR 120.910, Borrower's contribution (504 Loan Program), up to date as of November 5, 2026.
Inquiries

Request a feasibility study.

Describe the project, the capital source and the timeline, and Feasibility Study Company will reply by email.