SBA 7(a) and 504 · 504 Loans

SBA 504 Feasibility Studies

Feasibility Study Company is an independent SBA 504 feasibility study consultant: it prepares the study that a Certified Development Company can place behind a 504 credit memorandum, and it shows whether a new or special purpose project, in its market, supports the debt. SOP 50 10 8.1 with Technical Policy Updates, Section C, Chapter 1, tells the CDC that SBA can ask for a feasibility study and that independent reports may ease weaknesses in the credit analysis 2. The borrower's contribution starts at 10%, rises to 15% for a new business or for a limited or special purpose property, and reaches 20% when both are present 1. Ask about a 504 study.

The CDC Credit Memorandum

What the SOP tells a CDC about feasibility studies.

The 504 chapter is the one place the SOP discusses studies by name.

A 504 project has three parts: a loan from a third-party lender, a debenture sold through the Certified Development Company, and the borrower's contribution. The CDC writes a credit memorandum for SBA, and the SOP governs what it must say. In SOP 50 10 8.1, Section C, Chapter 1, two passages of that memorandum concern studies 2.

The first sits under independent studies or reports and reads: "Reports prepared independently of the small business may be beneficial in mitigating any weaknesses identified in the credit analysis" 2. The wording is permissive and tied to a weakness. A study answers a concern the CDC has already found, such as a thin operating history or a property with a narrow market.

The second is headed feasibility studies. It says: "SBA has the regulatory authority to request a feasibility study when it is needed to further understand the small business type and market conditions at the project location" 2. The SOP names who decides: "The SLPC Director will request a feasibility when appropriate" 2. The regulation behind that authority is 13 CFR 120.160(b): under it, SBA may require a feasibility study 3. Neither the regulation nor the SOP says a 504 loan needs one.

Circumstance the SOP listsWhat the study examines
"Market saturation by industry type and location"Competitor supply and demand in the trade area
"Unique market concept"Evidence that customers exist for a concept without a track record
"Highly specialized Project property"Use of the property and its value if the business fails
"Project size disproportionate to size of community it will serve"Capacity against local demand
"Significant rapid growth of the Applicant and/or affiliate group with a corresponding increase in undisbursed and/or unseasoned debt"Whether growth is supported by operations

The left column quotes the SOP's list 2; the right column is the firm's reading of what a study would examine for each item. Nowhere else in the SOP or the regulation are circumstances like these named, and the lead-in says they may cause a request. A project that meets none of them can still draw a request, and one that meets several can be approved without a study.

Borrower's Contribution

The tier follows the business age and the property.

The contribution sets how much equity sits under the third-party loan, so it also sets how much room the coverage test has.

13 CFR 120.910(a) requires the borrower to contribute cash or land "in an amount equal to the following percentage of the Project cost, excluding administrative costs" 1. The tiers depend on two facts. The first is business age: a contribution of at least 15% applies "if the Borrower (or Operating Company if the Borrower is an Eligible Passive Company) has operated for two years or less" 1. The second is the building: the same percentage applies "if the Project involves the acquisition, construction, conversion, or expansion of a limited or single purpose building or structure" 1. When both conditions apply, the minimum is 20% 1. In all other circumstances, it is 10% 1.

The SOP restates the tiers for the CDC. "All Borrowers must contribute at least" 10%, which "may be borrowed as long as it is subordinate to the Third Party Loan and the 504 debenture"; "New businesses must contribute at least" 15% 2. A higher tier shrinks the debenture. The resulting split is Third Party Lender 50%, debenture 40%, borrower 10%; debenture 35% at a 15% contribution and 30% at 20%.

Borrower or projectMinimum contributionSource
Established business, standard property10%12
New business (operated two years or less)15%12
Limited or single purpose property15%12
New business and special purpose property20%12

The tier matters to a study in two ways. It fixes the project cost the study has to cover: land, building, equipment and the working capital to carry the opening, with administrative costs separated as the regulation requires. It also marks the file where a CDC is likeliest to want more than the applicant's projections, because the history is shortest, the buyer pool for the property is narrowest and the equity asked is largest. The special purpose property note argues that this combination calls for independent evidence.

Debenture Limits and Coverage

The debenture ceiling and the coverage floor.

Both are stated in the SOP, and both are measured on the structure the study sizes.

The SOP says that "for all 504 Projects, the gross debenture is limited to an outstanding maximum balance of" $5 million "in the aggregate for each small business concern, including its affiliates," with exceptions for energy public policy projects and small manufacturers 2. A small manufacturer whose production facilities are all in the United States has a ceiling of $5.5 million for each project 24. SBA notice 5000-879058, effective , treats the 504 limit as separate from the 7(a) limit, so a lender may approve a 7(a) loan first and the CDC a 504 loan second 6; SBA's announcement of the change puts the two together at $10 million 7.

Coverage rests on history first. "For all 504 transactions, the repayment ability analysis must address debt service coverage," and the ratio must reach 1.15:1 using the latest year-end statements or a two-year average 2. Section C, Chapter 1, then sends a CDC whose history falls short to a second route: the CDC "must analyze projections" under the heading projection-based projects 2. That analysis "must include a minimum of 2 years of projections," the CDC "must calculate the projected debt service coverage and provide the assumptions supporting the projected cash flow coverage," and "If the projections show repayment in Year 2 but not in Year 1, sufficient liquidity must be shown to cover the shortfall in Year 1" 2. In summary form: historical EBITDA over combined post-transaction debt service, last fiscal year-end or two-year average; projections analysed only where history falls short.

The SOP also tells the CDC what the projections must be able to withstand: the analysis must "support and justify the reasonableness and attainability of the assumptions," which covers the justification for sales volume or revenue growth, for any reduction in expenses and a comparison to current industry trends 2. That is the passage a study serves. A sponsor with a strong operating company and a new building can show history in the operating company. A sponsor with a new company and a new building has to lean on the projection route, and so on the evidence under it.

Structure and Terms

Sizing the three pieces the study has to support.

The study's cost and revenue work feeds the split between lender, debenture and borrower.

The 504 structure is fixed by rule, so the study's job is to size the project and test the result, not to negotiate the split. The debenture side is capped too. At the 15% tier, "the Debenture will finance no more than 35% of the Project and at least 50% of the Project financing will be from banks or other financial institutions, state or local government, or foundations or other non-profit institutions" 2. A project cost that comes in higher than planned moves each piece, and a revenue forecast that comes in lower leaves less room to carry the combined debt service.

Maturities depend on the asset. Debentures run 10, 20 or 25 years, and the third-party lender's term has a floor of 7 years for a 10-year debenture, 10 years for a 20- or 25-year debenture. A study that separates land, building and equipment costs lets the CDC match each to a maturity, and shows how a longer amortization changes debt service. The upfront fee for the debenture is 0.50% for fiscal year 2027 loans, with a waiver for certain categories of borrower 8; the fee is a financing cost, so the study includes it in the uses.

What the Study Adds

The weaknesses a CDC is most likely to put to the study.

The SOP language is about mitigating weaknesses, so the useful study starts from the weakness.

The SOP casts independent reports as a means of easing weaknesses the credit analysis has found, so the best way to specify a 504 study is to start from the weakness the CDC has written down. Four are common. The first is a thin history, a borrower two years old or less, so the contribution is at the higher tier and the historical coverage test has little to read. The study answers by building demand from the trade area and showing the ramp to a stable year. The second is a narrow property: if the building suits one use, the lender's collateral value depends on that use continuing. The study answers by testing the market for the use and the competitors that could take its customers.

The third weakness is a concept without a track record, the SOP's "unique market concept." There the study documents analogous operators, with their volumes and prices, so the forecast rests on observed businesses and not on the sponsor's expectations. The fourth is scale: a project that is large for its town. The study counts the customers in the trade area and the capacity the project adds, so the lender sees whether the town can fill it.

In each case the report does more than agree with the application. It finds the evidence for and against, shows the base case and the downside, and says where the research found nothing. That is why a CDC can rely on it. A report that only repeats the sponsor's numbers does not mitigate a weakness, it restates it.

Jobs

The job creation or retention standard.

A 504 loan is also measured on public benefit, and the standard is set per job.

Alongside credit, a 504 project must meet a public policy goal. The job standard comes from Federal Register notice 2025-19072 (90 FR 47117) under 13 CFR 120.861: one job opportunity per $95,000 guaranteed by SBA, and per $150,000 where the borrower is a small manufacturer or the project advances an energy public policy goal 5. The notice says the requirements "will apply to all 504 loans that are approved under the 504 Loan Program on or after October 1, 2025" 5. It is a notice that invited comment, so check the Federal Register before relying on the amounts. A study that estimates staffing builds the job count from the operating plan: the positions the business needs at opening and at stabilization, drawn from the same labor budget as the cost projections, so the two cannot disagree.

Worked Cases

504 cases on this site.

Each hypothetical case sizes the contribution, the debenture and the third-party loan against documented market inputs.

Four 504 worked examples follow, built on invented sponsors, sites and projects; none of them records a real engagement or an accepted study. Each pairs a new business with a special purpose property, the combination that reaches the highest contribution tier.

504 Questions

SBA 504 feasibility study questions.

Does a 504 loan require a feasibility study?

Not as a standing rule. The SOP says SBA "has the regulatory authority to request a feasibility study when it is needed to further understand the small business type and market conditions at the project location" and lists five circumstances that may prompt a request 2. The regulation says SBA may require one 3.

Which contribution tier applies to a 504 project?

At least 10% in most cases. The floor is 15% for a new business or for a building with a narrow, single use, and 20% if both are true 12.

What is the debenture limit?

$5 million in the aggregate for each small business and its affiliates, and $5.5 million for a small manufacturer with its production in the United States 24.

What coverage does a CDC need to see?

A ratio of at least 1.15x, calculated on a historical basis 2. Where history falls short, Section C, Chapter 1, sends the CDC to a projection-based analysis: "a minimum of 2 years of projections," a calculated projected coverage with its assumptions, and liquidity to cover Year 1 when repayment only appears in Year 2 2. A study supplies the evidence behind those projections.

What does a special purpose property have to do with the study?

It raises the contribution tier and narrows the lender's exit if the business fails. The SOP names a highly specialized project property among the circumstances that may prompt a request 2. The research note on special purpose property risk goes further.

Structuring a 504 project? Start with the credit memorandum.

Share the property type, the sponsor's operating history and the proposed financing split with Feasibility Study Company. The reply sets out how the study can support the CDC's memorandum.

Request a methodology briefing
Sources

Data sources and dates.

Section C, Chapter 1 and the 504 regulations are quoted from stored primary copies; every program figure shown is printed from SBA's dated values.

  1. eCFR, 13 CFR 120.910, Borrower contribution, up to date as of November 5, 2026.
  2. U.S. Small Business Administration, SOP 50 10 8.1, Lender and Development Company Loan Programs, with Technical Policy Updates, Section C, Chapter 1, published September 25, 2026, effective October 1, 2026.
  3. eCFR, 13 CFR 120.160, Loan conditions, up to date as of November 5, 2026.
  4. eCFR, 13 CFR 120.931, Maximum debenture size, up to date as of November 5, 2026.
  5. Federal Register, Document 2025-19072 (90 FR 47117), SBA 504 job creation or retention standard, applies to 504 loans approved on or after October 1, 2025.
  6. U.S. Small Business Administration, Policy Notice 5000-879058, Coordination of 7(a) and 504 for Maximum Loan Limits, effective July 4, 2026.
  7. U.S. Small Business Administration, Small Businesses Now Eligible for $10 Million in SBA Financing (news release), July 7, 2026.
  8. U.S. Small Business Administration, Information Notice 5000-881796, FY 2027 504 Program Fees, fees for loans approved October 1, 2026 to September 30, 2027.
Inquiries

Request a feasibility study.

Describe the project, the capital source and the timeline, and Feasibility Study Company will reply by email.